Dimensions (H × W × D)

86.1 × 440 × 465 mm (3.39 × 17.32 × 18.31 in.)

43.6 × 440 × 367 mm (1.72 × 17.32 × 14.45 in.)

43.6 × 440 × 427 mm (1.72 × 17.32 × 16.81 in.)

43.6 × 440 × 367 mm (1.72 × 17.32 × 14.45 in.)

43.6 × 440 × 427 mm (1.72 × 17.32 × 16.81 in.)

43.6 × 440 × 427 mm (1.72 × 17.32 × 16.81 in.)

Weight

Ÿ 18 kg (39.68 lb)

Ÿ 6.5 kg (14.33 lb)

Ÿ 8.5 kg (18.74 lb)

Ÿ 6.0 kg (13.23 lb)

Ÿ 8 kg (17.64 lb)

Ÿ 8.5 kg (18.74 lb)

Console port

The console port of the S5800-60C-PWR, S5800-32C or S5800-32C-PWR is available on the front panel.

The console port of the S5800-56C, S5800-56C-PWR or S5800-32F is available under the logo panel on the front panel.

Switching Capacity

360 Gbps

Port Switching Capacity

284Gbps

256Gbps

208 Gbps

Forwarding Speed

213Mpps

192Mpps

156Mpps

Management Ethernet port

—

—

—

—

—

1, on the rear panel

USB interface

1 (full speed)

The USB interface of the S5800-60C-PWR, S5800-32C or S5800-32C-PWR is available on the front panel.

The USB interface of the S5800-56C, S5800-56C-PWR or S5800-32F is available under the logo panel on the front panel.

10/100/1000Base-T Ethernet port

48

Supports PoE

48

48

Supports PoE

24

24

Supports PoE

—

100/1000Base-X SFP interface

4

—

—

—

—

24

Expansion slot

3

1

Interface card models supported (optional)

LSW1SP4P0 (provides four 1 Gbps/10 Gbps SFP+ interfaces, which can be used to connect IRF member devices)

LSW1SP2P0 (provides two 1 Gbps/10 Gbps SFP+ interfaces, which can be used to connect IRF member devices)

LSW1XP4P0 (provides four 10 Gbps XFP optical interfaces, which can be used to connect IRF member devices)

LSW1XP2P0 (provides two 10 Gbps XFP optical interfaces, which can be used to connect IRF member devices)

LSW1GP16P0 (provides sixteen 1000 Mbps SFP interfaces)

LSW1GT16P (provides sixteen 1000 Mbps Ethernet electrical interfaces)

OAP card

IPS card

Firewall card

WLAN controller modul

WLAN controller module

Hot swappable PoE module

LSW148POEM

—

Fan

Hot swappable fan tray (LSW1FAN)

Fixed fans

Fixed fans

Fixed fans

Fixed fans

Hot swappable fan tray (LSW1BFAN)

Hot swappable power module models supported

PSR300-12A

PSR300-12D1

PSR750-A

PSR750-D

—

—

—

—

PSR150-A

PSR150-D

RPS power module models supported

RPS1600-A

RPS800-A

RPS1600-A

RPS800-A

RPS1600-A

RPS800-A

Input voltage

AC

Rated voltage: 100 VAC to 240 VAC, 50/60 Hz

Max voltage: 90 VAC to 264 VAC, 47/63 Hz

DC

Rated voltage:

300 W DC: –48 VDC to –60 VDC

750 W DC: –54 VDC to –57 VDC

—

—

—

—

Rated voltage: –48 VDC to –60 VDC

RPS

Rated voltage: –52 VDC to –55 VDC

Rated voltage: 10.8 VDC to 13.2 VDC

Rated voltage: –52 VDC to –55 VDC

Rated voltage: 10.8 VDC to 13.2 VDC

Rated voltage: –52 VDC to –55 VDC

Rated voltage: –52 VDC to –55 VDC

Power consumption

DC: 94 W

AC: 96 W

102 W

DC: 107 W

AC: 131 W

67 W

DC: 64 W

AC: 85 W

DC: 58 W

AC: 67 W

Power consumption (full configuration)

Single DC output: 1840 W (1500 W for PoE output)

Dual DC outputs: 1828 W (1500 W for PoE output)

Single AC output: 714 W (370 W for PoE output)

Dual AC outputs: 1147 W (740 W for PoE output)

163 W

DC: 973 W (740 W for PoE output)

AC: 673 W (370 W for PoE output)

105 W

DC: 870 W (740 W for PoE output)

AC: 598 W (370 W for PoE output)

DC: 136 W

AC: 146 W

Operating temperature

0°C to 45°C (32°F to 113°F)

Operating humidity (noncondensing)

10% to 90%

Forwarding mode

store-forward mode

store-forward mode, cut through mode

Link aggregation

Supporting GE port and 10GE port aggregation

Supporting static and dynamic aggregation

Flow control

Supporting IEEE802.3x flow control and back pressure

Jumbo Frame

Supported

MAC address table

Supporting 32K MAC addresses

Supporting blackhole MAC address

Supporting the setting of the maximum MAC address learning number of ports

VLAN

Supporting up to 4094 VLANs based on port, protocol, MAC address, and IP subnet

Supporting QinQ and flexible QinQ

Supporting Voice VLAN

VLAN Mapping

Supporting 1:1 VLAN Mapping

Supporting N:1 VLAN Mapping

Supporting 2:2 VLAN Mapping

DHCP

Supporting DHCP Client

Supporting DHCP Snooping

Supporting DHCP Relay

Supporting DHCP Server

IRF2

Supporting IRF2

Supporting distributed device management, distributed link aggregation, and distributed resilient route

Supporting stacking through standard Ethernet interfaces

Supporting local and remote stacking

IPv4 routing

Supporting static routing, RIP, OSPFv2, BGP, and ISIS

Supporting equivalent route, route policy, VRRP, and policy-based routing

IPv6 routing

Supporting static routing, RIPng, OSPFv3, BGP4+ for IPv6, and ISISv6

Supporting equivalent route, route policy, VRRP, and policy-based routing

URPF

Supporting reverse route check

MCE

Supported

BFD

OSPF, BGP, IS-IS, Static Route

IPv6 over IPv4 Tunnel

Supporting manual IPv6 tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel

IPv4 multicast

Supporting IGMP Snooping

Supporting IGMP v1/v2/v3

Supporting PIM-DM/SM/SSM

Supporting MSDP and MBGP

Supporting multicast VLAN and multicast VLAN+

IPv6 multicast

Supporting MLD Snooping v1/v2

Supporting MLD v1/v2

Supporting PIM-DM/SM/SSM for IPv6

Supporting MBGP for IPv6

Supporting IPv6 multicast VLAN and IPv6 multicast VLAN+

Broadcast/multicast/unicast storm suppression

Supporting storm suppression based on port rate percentage

Supporting PPS-based storm suppression

Supporting kbps-based storm suppression

MSTP

Supporting STP/RSTP/MSTP

Supporting STP Root Guard and BPDU Guard

RRPP

Supporting RRPP and RRPP multi-instance

Smart link and Monitor link

Supporting smart link and smart link multi-instance

Supporting monitor link

QoS/ACL

Supporting packet filtering at Layer 2 (L2) to Layer 4 (L4); providing traffic classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, VLAN

Supporting packet filtering based on time range

Supporting a large capacity of bi-directional ACLs

Supporting restriction of the rate at which ports receive and send packets

Supporting packet redirection

Each port supports eight output queues.

Supporting flexible queue scheduling algorithm, which can be set based on ports and queues; supporting Strict Priority (SP), WDRR, WFQ, and SP+WDRR

Supporting the remarking of 802.1p and DSCP priorities of packets

Supporting WRED congestion avoidance

Mirroring

Supporting N:1 port mirroring and flow mirroring

Supporting multiple mirroring observation ports

Supporting remote mirroring of ports (RSPAN)

Supporting remote mirroring of enhanced ports (ERSPAN)

Security

Supporting hierarchical user management and password-based protection

Supporting AAA and Radius authentication

Supporting MAC address authentication, 802.1x authentication, and portal authentication

Supporting HWTACACS

Supporting SSH 2.0

Supporting IP+MAC+port binding

Supporting IP Source Guard

Supporting HTTPs and SSL

Supporting Public Key Infrastructure (PKI)

Supporting EAD

Supporting ARP detection (based on DHCP Snooping security entries, 802.1x entries, or static IP-MAC address mappings)

OAA

Firewall card

IPS card

Radio control service board

Traffic management

Supporting NetStream (Only the S5800 series switches support it.)

Loading and upgrade

Supporting loading and upgrade by using the XModem protocol, FTP and TFTP

Management

Supporting configuration through CLI, Telnet, and Console port

Supporting SNMPv1/v2/v3

Supporting Remote Monitoring (RMON) alarms, events and history records

Supporting iMC and Web-based NMS

Supporting system logs and hierarchical alarms

Supporting HGMPv2

Supporting power alarms

Supporting fan and temperature alarms

Maintenance

Supporting Ping, Tracert, NQA, and Track

Supporting Virtual Cable Test and DLDP

Supporting 802.1ag and 802.3ah

Supporting upload and download of files through USB interfaces