Feature | S5500-34C-HI | S5500-58C-HI | S5500-34F-HI | S5500-34C-PWR-HI | S5500-58C-PWR-HI |
Dimensions (H × W × D) | 43.6 × 440 × 360 mm | 43.6 × 440 × 420 mm | 43.6 × 440 × 360 mm | 43.6 × 440 × 460 mm | 43.6 × 440 × 460 mm |
Weight | < 7.5 kg | < 8.5 kg | < 7.5 kg | < 10 kg | <10.5 kg |
Management ports | One Console port, and one network management port |
Front panel data ports | 24 × 10/100/1000Base-T Ethernet ports 4 × 100/1000Base-X SFP GE ports 2 × SFP+ ports | 48 × 10/100/1000Base-T Ethernet ports 4 × 100/1000Base-X SFP GE ports 2 × SFP+ ports | 24 × 100/1000Base-X SFP GE ports 4 × 10/100/1000Base-T Ethernet ports 2 × SFP+ ports | 24 × 10/100/1000Base-T Ethernet ports 4 × 100/1000Base-X SFP GE ports 2 × SFP+ ports | 48 × 10/100/1000Base-T Ethernet ports 4 × 100/1000Base-X SFP GE ports 2 × SFP+ ports |
Expansion slots | Two expansion slots |
Optional interface card | l 1-port 10GE XFP interface card l 2-port 10GE XFP interface card l 2-port 10GE CX4 interface card l 2-port SFP+ interface card l 2-port SFP interface card l 8-port SFP interface card (S5500-34C-HI/S5500-34F-HI/S5500-34C-PWR-HI, only supported by slot 1) l 8-port 10/100/10000Base-T copper interface card (S5500-34C-HI/S5500-34F-HI/S5500-34C-PWR-HI, only supported by slot 1 ) |
PoE | Not supported | Supports 802.3af and 802.3at, with the power consumption of 30 W for each port |
Port aggregation | - LACP
- Manual aggregation
- Up to 128 aggregate groups, and up to eight GE or four 10GE ports in each group
|
Port features | - IEEE802.3x flow control (full duplex)
- Storm control based on port rate percentage
- PPS-based storm control
|
MAC table | - Up to 32K MAC addresses
- Blackhole MAC address
- Configurable maximum number of MAC addresses that can be learned by a port
|
VLAN | - Port-based VLAN (4K)
- MAC-based VLAN
- Protocol-based VLAN
- Subnet-based VLAN
- QinQ and selective QinQ
- VLAN mapping
- Voice VLAN
- GVRP
|
Layer 2 ring network protocol | |
DHCP | - DHCP client
- DHCP snooping
- DHCP relay
- DHCP server
- DHCP snooping option82/DHCP Relay option82
|
IRF2 | - IRF2
- Distributed device management, distributed link aggregation, and distributed resilient routing
- Stacking through standard Ethernet interfaces
- Local device stacking and remote device stacking
|
IP routing | - Static routing
- RIPv1/v2 and RIPng
- OSPFv1/v2 and OSPFv3
- BGP4 and BGP4+ for IPv6
- ECMP and policy-based routing
- VRRP/VRRPv3
|
IPv6 | - Neighbor discovery (ND)
- PMTU
- IPv6-Ping, IPv6-Tracert, IPv6-Telnet, and IPv6-TFTP
- Manual tunnel configuration
- 6to4 tunnel
- ISATAP tunnel
- IPv6 in IPv6 tunnel
- IPv4 in IPv6 tunnel
- GRE tunnel
|
Multicast | - IGMP snooping v1/v2/v3 and MLD Snooping v1/v2
- PIM snooping
- MLD proxy
- Multicast VLAN
- IGMP v1/v2/v3 and MLD v1/v2
- PIM-DM, PIM-SM, and PIM-SSM
- MSDP and MSDP for IPv6
- MBGP and MBGP for IPv6
|
MPLS | - MPLS forwarding, including MPLS LER/MPLS LSR
- LSP
- LDP
- MPLS TE
- L2VPN
- L3VPN
- VPLS
- MCE
|
Mirroring | - Traffic mirroring
- N:4 port mirroring
- Local and remote port mirroring
|
ACLQoS | - Packet filtering at Layer 2 through layer 4
- Traffic classification based on source MAC addresses, destination MAC addresses, source IPv4/IPv6
addresses, destination IPv4/IPv6 addresses, TCP/UDP port numbers, protocol types, and VLANs - Time range-based ACL
- Bidirectional ACL
- VLAN-based ACL
- HQOS
- Port rate limit (receiving and transmitting)
- Packet redirection
- Committed access rate (CAR)
- Eight output queues on each port, and 48 queues on the CPU port
- Flexible queue scheduling algorithms based on ports and queues, including SP, WRR, SP+WRR, WFQ, and
|
SP+WFQ - Remarking of 802.1p and DSCP priorities
|
Security | - Hierarchical user management and password protection
- 802.1X authentication, centralized MAC authentication
- Guest VLAN
- RADIUS authentication
- SSH 2.0
- Port isolation
- Port security
- Portal authentication
- EAD
- DHCP snooping and anti-fraud DHCP server
- Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks
- BPDU guard and Root guard
- URPF, prevent source IP spoofing, viruses and attacks
- IP/Port/MAC binding
- Plaintext and MD5 authentication of OSPF and RIPv2 packets
|
Management and maintenance | - Loading and upgrading through XModem/FTP/TFTP
- Configuration through CLI, Telnet, and console port
- SNMPv1/v2/v3 and Web-based NMS
- Remote monitoring (RMON ) alarm, event, and history recording
- IMC NMS
- System log, alarming based on severities, and output of debugging information
- HGMPv2
- NTP
- Alarm for power supplies, fans, and temperature
- Ping and Tracert
- Virtual cable test (VCT)
- Device link detection protocol (DLDP)
- LLDP
- Loopback-detection
- IPFIX
- One-button power saving
- Ethernet time synchronization (1588v2)
|
Input voltage | AC | Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz Maximum voltage range: 90 VAC to 264 VAC @ 47 Hz or 63 Hz | Rated voltage range for 720W: 100 VAC to 240 VAC @ 50 Hz or 60 Hz Maximum voltage range for 720W: 90 VAC to 264 VAC @ 47 Hz or 63 Hz Rated voltage range for 1110W: 115 VAC to 240 VAC @ 50 Hz or 60 Hz Maximum voltage range for 720W: 102.5 VAC to 264 VAC @ 47 Hz or 63 Hz |
DC | Rated voltage range: –48 VDC to –60 VDC Maximum voltage range: –36 VDC to 72 VDC | Not supported |
Power consumption (full configuration) | 141 W | 191 W | 135 W | 950 W | 1840 W |
Operating temperature | 0°C to 50°C (32°F to 122°F) 0°C to 45°C (32°F to 113°F) if 40KM/80KM XFP transceiver module is used | 0°C to 45°C (32°F to 113°F) |
Operating relative humidity (non-condensing) | 5% to 95% |
